High Efficiency Boilers KSA
High Efficiency Boilers KSA
Do you need to upgrade from a standard-efficiency boiler to a high-efficiency boiler? If you have an old boiler that isn't working efficiently, then you’ll need new gas boilers fitted. TESI is a boiler supplier; we can provide you with high-efficiency KSA boilers that are capable of extracting more energy from the fuel and
turning it into usable heat.
Our modern high efficiency Boilers in KSA can be 90% efficient; upgrading to a condensing boiler can save as much as 30% on your heating system.
Our high-efficiency boiler is engineered to live up to our legendary standards while pushing hydronic heating forward. Whether you're a homeowner, contractor, or built-in engineer, there's a high-efficiency boiler that delivers the performance you need.
High-Performance, Efficient, and Adaptable Boilers
TESI’s premium heat first combination boiler provides hot water when you need it and the comfort where you want it with extreme efficiency. We offer quiet, sleek, and sustainable space heating that's adaptable to any residential heating application.
Corrosion Resistance
Our High Efficiency Boilers KSA is a corrosion-resistant boiler designed to operate in low-temperature condensing applications. It brings our industry-leading cast iron dependability together with high efficiency performance, great for high-temperature systems.
Advantage of Our High-Efficiency KSA Boilers
- Reduce fuel bills
- Can be combined with older-type boilers
- Need yearly cleaning for peak efficiency
- We make sure our installer has condensing boiler training/experience.
Venting is different for condensing vs. non-condensing
The exhaust vent can't be sheet metal; it needs to be stainless steel, CPVC, or schedule 40 PVC.
- Piping arrangements may need to be different.
- Low-mass boilers need primary-secondary piping.
- On average, systems are oversized by 60%.
- Spend less than 1% of the operation at full load.
- Don't add "safety factors" when sizing or selecting
- Fewer temperature swings
- Equipment runs even cycles instead of rapid on.
Combustion Efficiency
The high efficiency of heat source in converts the chemical energy content of its fuel into usable heat is based on the percentage of heat lost up the flue. Heat efficiency is calculated using measurements of exhaust gas temperature and carbon dioxide content.
Thermal Efficiency
Measurement of efficiency, which determines the exact amount of heat transferred into the water during the operation of the boiler. Thermal efficiency is expressed as the percentage of available heat from the burner that is transferred into the water.
AFUE (Annual Fuel Utilization Efficiency)
An efficiency boiler rating expressed as a percentage is based on a federal government test procedure. The efficiency test may include combustion efficiency, flue loss, and flue loss in the burner off cycle. The data is calculated to simulate an operation of a complete heating season. AFUE measurements are only calculated for boilers less than 300,000 BTU/h.
Our High Efficiency Boilers KSA provides additional value for your customers while increasing your equipment sales with rebates for high-efficiency boilers!